The ARM® Cortex™-M0 processor is the smallest, lowest-power and most energy-efficient ARM processor available. The exceptionally small silicon area, low power, and minimal code footprint of the processor achieves 32-bit performance at an 8-bit price point, bypassing the step to 16-bit devices.

The Cortex-M0 processor promises substantial savings in system cost while retaining tool and binary compatibility with feature-rich processors such as the Cortex-M3 processor. It consumes as little as 85 µW/MHz (0.085 mW) in an area of typically under 12 K gates, enabling the creation of ultra low-power analog and mixed signal devices.

LPC1102

32-bit ARM Cortex-M0 microcontroller with 32 kB flash and 8 kB SRAM, one RS-485/EIA-485 UART, one SPI interface with SSP features, four general purpose counter/timers, a 10-bit ADC, and 11 general purpose I/O pins.

LPC1102 datasheet

LPC1111/12/13/14

32-bit ARM Cortex-M0 microcontroller with up to 32 kB flash and 8 kB SRAM, one fast-mode plus I²C-bus interface, oneRS-485/EIA-485 UART, up to two SPI interfaces with SSP features, four general purpose counter/timers, a 10-bit ADC, and up to 42 general purpose I/O pins.

LPC111/12/13/14 datasheet

LPC11Cx2/Cx4 - CAN

The peripheral complement of the LPC11Cx2/Cx4 includes 16/32 kB of flash memory, 8 kB of data memory, one C_CAN controller, one fast-mode plus I²C-bus interface, one RS-485/EIA-485 UART, two SPI interfaces with SSP features, four general purpose counter/timers, a 10-bit ADC, and up to 40 general purpose I/O pins.

LPC11Cx2/Cx4 datasheet

LPC11U1x - USB

Equipped with a highly flexible and configurable Full Speed USB 2.0 device controller, the LPC11U1x brings unparalleled design flexibility and seamless integration to today’s demanding connectivity solutions. The peripheral complement of the LPC11U1x includes up to 32 kB of flash memory, 6 kB of SRAM data memory, one Fast-mode Plus I²C-bus interface, one RS-485/EIA-485 USART with support for synchronous mode and smart card interface, two SSP interfaces, four general purpose counter/timers, a 10-bit ADC, and up to 40 general purpose I/O pins.

LPC11U1x datasheet

LPC12xx

The LPC1200 industrial control series targets a wide range of applications, such as white goods, motor control, power conversion and power supplies. It also offers a wide range of flash memory sizes, ranging from 32 kB to 128 kB. The small 512 Byte page erase of the flash memory brings multiple design benefits, such as finer EEPROM emulation, boot-load supports from any serial interface, and ease of in-field programming with reduced on-chip RAM buffer requirements.

LPC122x datasheet